2000-06-30  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* Ready for release of 1.04.

2000-06-30  heine  <heine@anaximander>

	* texi/Makefile.am: Remove Log entries.

2000-06-29  heine  <heine@anaximander>

	* texi/ftape-4.texi: Correct page numbers.

	* etc/texinfo.tex: updated version, correct offsets for A4.

	* texi/Makefile.am, sgml/Makefile.am, html/Makefile.am, etc/Makefile.am:
	Add DISTCLEANFILES variable.

2000-06-25  heine  <heine@anaximander>

	* etc/Makefile.am: Fix rule for copying extra data.

	* etc/.cvsignore: Add missing data files.

	* texi/ftape-4.texi, texi/Testing.texi, texi/Bugs.texi,
	texi/Documentation.texi, texi/Implementation.texi,
	texi/Indices.texi, texi/Installation.texi, texi/Introduction.texi,
	texi/Loading.texi, texi/QuickInstall.texi: Major update to
	ftape-4.03.

	* html/up-arrow.gif, html/linux-ftape.gif, html/missing-arrow.gif,
	html/next-arrow.gif, html/prev-arrow.gif: GIF files (hopefully the
	wrapper handles these ok ...)

	* etc/texi2www.in: Fix @iftex handling.

1999-03-17  cvs  <cvs@anaximander>

	* etc/Makefile.am:
	Finally, remove EXTRA_DATA variable and add "AUTOMAKE_OPTIONS = 1.4"
	to force version 1.4 of automake. Why the hell didn't the author of
	automake let EXTRA_DATA be a no-op.

1999-02-26  cvs  <cvs@anaximander>

	* configure.in: Replace AM_PROG_INSTALL by AC_PROG_INSTALL

1999-02-25  cvs  <cvs@anaximander>

	* html/Makefile.am:
	Add a symlink from ${datadir}/texi2www to ${PKGDATADIR}/html.

	* configure.in:
	Install the html ftape-4 manual under ${datadir}/texi2www/${DOCNAME}
	so that cross references from the ftape-tools manual to the ftape-4
	manual work correctly. Define the DOCNAME macro. Add a
	--with-ftape4dir switch for the location of the ftape-4.x sources.

	* configure.in: Do not expand the prefix variable too early.

	* COPYING, INSTALL: Removed all autogenerated files.

	* etc/Makefile.am:
	Revice EXTRA_DATA macro, it is needed by older automake versions.

	* etc/missing, etc/mkinstalldirs, etc/install-sh, etc/mdate-sh:
	Removed all auto-generated files.

1999-02-23  cvs  <cvs@anaximander>

	* etc/texi2sgml.in: Added the "group" block

	* etc/.cvsignore: Added vtblc.h and ftvt.h

1999-02-22  cvs  <cvs@anaximander>

	* etc/Makefile.am:
	Generalize installation of extra-files for html HREF's. Formerly
	worked only for the ftape-manual

1998-12-18  cvs  <cvs@anaximander>

	* texi/Makefile.am, sgml/next.gif, sgml/prev.gif, sgml/toc.gif, sgml/Makefile.am, html/next-arrow.gif, html/prev-arrow.gif, html/up-arrow.gif, html/linux-ftape.gif, html/Makefile.am, html/missing-arrow.gif, etc/Makefile.am, acinclude.m4, configure.in, Makefile.am:
	Replaced the $Source: /usr/local/cvs/linux/ftape/ftape-doc/ftape-manual/ChangeLog,v $ keywords substitution by the $RCSfile: ChangeLog,v $
	keyword substitution.

	* etc/Makefile.am:
	Replaced the $Source: /usr/local/cvs/linux/ftape/ftape-doc/ftape-manual/ChangeLog,v $ keyword substitution by the $RCSfile: ChangeLog,v $ substitution.

1998-11-13  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* configure.in: Updated for ftape-4.03

	* texi/Implementation.texi:
	Document the change MTFSR/BSR/SEEK semantics.

	* texi/ftape-4.texi: Updated for ftape-4.03

1998-11-12  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* texi/Testing.texi, texi/Loading.texi:
	Don't refer to /sbin/swapout, but to /usr/local/bin/swapout as this is
	the default installation location.

	* texi/Installation.texi:
	Refer to the top of the ftape-tools info documentation, not to the
	Vtblc node.

1998-08-30  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* etc/Makefile.am:
	Only copy EXTRA_MANUAL_REFS if they are different from the present
	versions.

	* etc/Makefile.am, etc/.cvsignore:
	Add target for the EXTRA_MANUAL_REFS.

	* etc/texi2www.in, etc/texi2sgml.in:
	Don't distinguish lowercase case from uppercase in the "Concept Index"

	* texi/ftape-4.texi:
	Move the ftape logo to a sub title instead of the title so the the
	title is centered properly.

	* texi/Loading.texi:
	Update to slightly changed handling of ft_fdc_driver option.

	* etc/zftape.h, etc/qic117.h, etc/mtio.h, etc/modules.txt, etc/insert, etc/ftape.txt, etc/ftape-header-segment.h, etc/floppy.c.dif, etc/MAKEDEV.ftape, etc/BUGS, etc/ftape.h, etc/RELEASE-NOTES, etc/MCONFIG:
	No need to keep them here ...

1998-08-24  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* configure.in:
	Set version of ftape-doc to 1.02, version of ftape-manual to ftape-4.02

1998-08-18  Claus-Justus Heine  <heine@instmath.rwth-aachen.de (Claus-Justus Heine)>

	* etc/ftape.h, etc/RELEASE-NOTES, configure.in, README, NEWS:
	Update to ftape version 4.01

	* etc/Makefile.am: Don't surround EXTRA_MANUAL_REGS by quotes

	* sgml/Makefile.am: Add manualsgml_DATA to EXTRA_DIST

	* configure.in: Fix a typo.

	* README: Add a note about the `--enable-postscript' option.

	* texi/Makefile.am, sgml/Makefile.am, configure.in:
	Don't create and format the postscript version by default, must be
	triggered by --enable-postscript

	* README, NEWS, Makefile.am, ChangeLog, AUTHORS:
	Polished READMEs and such for first release of the manual.

	* texi/Installation.texi: Forgot some square brackets.

	* etc/Makefile.am:
	Add rule to automatically retrieve text document hyper-referenced in
	the HTML manual.

	* texi/ftape-4.texi, texi/Loading.texi, texi/Installation.texi:
	Reflect the fact the zft-compressor.o module is back.

	* etc/zftape.h, etc/qic117.h, etc/insert, etc/ftape.txt,
	etc/ftape.h, etc/ftape-header-seg
	ment.h, etc/RELEASE-NOTES, etc/Makefile.am, etc/MCONFIG, etc/BUGS:
	Updated to ftape-4.00 release

	* configure.in:
	Remove texi2... and texinfo.tex from the EXTRA_MANUAL_REFS variable

Tue Aug 18 10:30:29 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/Installation.texi: Forgot some square brackets.

	* etc/Makefile.am:
	Add rule to automatically retrieve text document hyper-referenced in
	the HTML manual.

	* texi/ftape-4.texi, texi/Loading.texi, texi/Installation.texi:
	Reflect the fact the zft-compressor.o module is back.

	* etc/zftape.h, etc/qic117.h, etc/insert, etc/ftape.txt,
 	etc/ftape.h, etc/ftape-header-segment.h, etc/RELEASE-NOTES,
 	etc/Makefile.am, etc/MCONFIG, etc/BUGS: Updated to ftape-4.00
 	release

	* configure.in:
	Remove texi2... and texinfo.tex from the EXTRA_MANUAL_REFS variable

Mon Aug 17 17:57:54 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2sgml.in: fix command line parsing of texi2sgml.in

Sat Aug 15 21:56:07 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/Loading.texi, texi/Installation.texi,
 	texi/Implementation.texi, texi/Documentation.texi: Letter/a4
 	formatting and updated to reflect the revival of the
 	zft-compressor module.

	* etc/ftape.txt, configure.in: Added the kernel ftape README ftape.txt

Wed Aug 12 13:23:45 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/Testing.texi, texi/QuickInstall.texi,
 	texi/Loading.texi, texi/Introduction.texi, texi/Installation.texi,
 	texi/Implementation.texi, texi/Documentation.texi: Update the
 	notes concerning the patches subdirectory. Several ispell runs.

Mon Aug 10 09:57:14 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/Testing.texi, texi/QuickInstall.texi,
 	texi/Makefile.am, texi/Loading.texi, texi/Introduction.texi,
 	texi/Installation.texi, texi/Implementation.texi,
 	texi/Documentation.texi, texi/Bugs.texi: Various spelling and
 	format fixes. Add the MTLOAD/UNLOAD ioctl.

	* sgml/Makefile.am:
	Only put the *.sgml and  *.txt manual into the distribution.

	* etc/texi2www.in, etc/texi2sgml.in: Prettify printing of email
 	addresses, fix @ifnothtml handling and such.

	* etc/modules.txt: Stolen form Linux-2.1

	* configure.in:
	Run dvips with the proper papersize options for letter paper. Fix
	handling of "extra doc files" (header files and such)

	* NEWS: It's versin 4.00, not 4.0

	* etc/Makefile.am:
	Use configure substitution @EXTRA_MANUAL_REFS@ instead of fiddling
	around with automake's conditional constructs.

Sun Aug  9 23:06:25 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2sgml.in:
	Use htmlurl for @inforef, and mention the info-file referenced. Strip
	all formatting directives from the node name, as this isn't handled
	properly by sgmltools-1.0.7

	* etc/texi2www.in, etc/texi2sgml.in:
	Fix handling of @iftex/@ifnottex macros. @ifnottex should be included
	in the output, @iftex shouldn't.

	* texi/ftape-4.texi, texi/QuickInstall.texi, texi/Loading.texi,
 	texi/Introduction.texi, texi/Installation.texi,
 	texi/Implementation.texi, texi/Documentation.texi: Need to refill
 	some paragraphs, some lines became too long, cause by
 	substitutions.

	* configure.in: Call it 4.00 instead of 4.0

	* etc/floppy.c.dif, etc/ftape-header-segment.h, etc/ftape.h,
 	etc/mtio.h, etc/qic117.h, etc/zftape.h, etc/MAKEDEV.ftape,
 	etc/Makefile.am: Initial revision

	* etc/texi2www.in, etc/texi2sgml.in:
	Escape space and + characters before committing an info node to the
	info2html gateway.

Fri Aug  7 23:01:33 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/Loading.texi:
	Loading.texi should be ready now, at least in principle.

	* texi/ftape-4.texi, texi/Testing.texi, texi/QuickInstall.texi,
 	texi/Makefile.am, texi/Loading.texi, texi/Introduction.texi,
 	texi/Installation.texi, texi/Documentation.texi, texi/Bugs.texi:
 	Update documentation of module options. Loading.texi is nearly
 	done now except for the example which are out of date.

	* sgml/Makefile.am, html/Makefile.am:
	Remove TEXINFO_TEX variable as it isn't needed here.

	* etc/texi2www.in, etc/texi2sgml.in:
	Fix the handler of @set and @value commands

	* configure.in:
	Add conditional FTAPE_MANUAL so that we can share the "etc/"
	subdirectory with the ftape-tools distribution

	* etc/Makefile.am:
	Define FTAPE_MANUAL conditional and define dummy manualhtmldir
	variable to make automake happy. We are sharing the "etc" dir with the
	ftape-manual package.

Thu Aug  6 15:06:44 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/QuickInstall.texi,
 	texi/Introduction.texi, texi/Installation.texi, texi/Indices.texi,
 	texi/Documentation.texi: Updated the installation chapters. Should
 	be slightly better now.

	* etc/RELEASE-NOTES, etc/insert, etc/Makefile.am, etc/BUGS,
 	etc/MCONFIG: added some files from the kernel module distribution
 	for easy reference in the HTML manual.

	* texi/ftape-4.texi:
	Update Johan De Wit's email address. Exclude the FAQ from the
	HOWTO. Will be included before releasing the package.

	* texi/Makefile.am, sgml/Makefile.am, html/Makefile.am:
	Modifications for correct VPATH build

Wed Aug  5 18:26:28 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* texi/ftape-4.texi, texi/Makefile.am:
	Add some little Makefile magic to get configure's results for HOWTOURL
	and FAQURL without needing to remake all the docuementation if they
	didn't change

	* texi/Introduction.texi:
	Add both, inforef and uref, for HOWTO reference.

	* etc/texi2www.in, etc/texi2sgml.in:
	Changed "See " to "See info-file" for @inforef

	* sgml/Makefile.am, html/Makefile.am, configure.in:
	Add the package as prefix to htmldir and sgmldir

	* configure.in: Use $(top_srcdir/etc for LaTeX path

	* configure.in: Make location of Ftape-FAQ and HOWTO configurable

	* etc/texi2sgml.in: $in_data should be local in process_table

	* texi/ftape-4.texi, texi/QuickInstall.texi, texi/Makefile.am,
 	texi/Introduction.texi, texi/Documentation.texi, texi/Bugs.texi,
 	texi/.cvsignore: Started to update to ftape-4.x

Mon Aug  3 10:38:23 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2www.in, etc/texi2sgml.in: Prettify the index.

	* texi/.cvsignore, html/Makefile.am, BUGS, NEWS, .cvsignore:
	Finale auto-version updates

	* sgml/Makefile.am, sgml/.cvsignore, html/Makefile.am,
 	etc/texi2sgml.in, configure.in, texi/Attic/ftape-4.texi.in,
 	texi/ftape-4.texi, texi/Attic/Testing.texi.in, texi/Testing.texi,
 	texi/Attic/QuickInstall.texi.in, texi/QuickInstall.texi,
 	texi/Makefile.am, texi/Attic/Loading.texi.in, texi/Loading.texi,
 	texi/Attic/Introduction.texi.in, texi/Introduction.texi,
 	texi/Attic/Installation.texi.in, texi/Installation.texi,
 	texi/Attic/Indices.texi.in, texi/Indices.texi,
 	texi/Attic/Implementation.texi.in, texi/Implementation.texi,
 	texi/Attic/Documentation.texi.in, texi/Documentation.texi,
 	texi/Attic/Copying.texi.in, texi/Attic/Bugs.texi.in,
 	texi/Bugs.texi, texi/.cvsignore: use @set/@value pairs instead of
 	autoconf replacements

Sat Aug  1 15:57:07 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2www.in, etc/texi2sgml.in: Add copyright notice.

	* etc/Makefile.am:
	Add texi2sgml, texi2www and latex as noinst_SCRIPTS (but this is a
	no-op it seems)

	* etc/mdate-sh: Initial revision

Fri Jul 31 13:25:04 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2www.in: $in_data needs to be local in parse_table()

	* etc/texi2www.in:
	Replaced the $ characters by @ characters. $ causes a
	hellofalotoftrouble with the wildcard make function and shell
	substitutions.

	* etc/texi2www.in, etc/texi2sgml.in: Add the "@uref" macro.

	* texi/Makefile.am, texi/Attic/Copying.texi.in, sgml/Makefile.am, html/Makefile.am, configure.in:
	Synched with documentation of the ftape-tools package

	* texi/Attic/ftape-4.texi.in, texi/Attic/ftape.texi.in:
	Renamed ftape.texi.in to ftape-4.texi.in

	* etc/texi2www.in, etc/texi2sgml.in:
	Add info to html gate way for @inforef macros.

	* etc/texinfo.tex: Recommit without keyword substitution.

	* etc/texinfo.tex, etc/texi2www.in, etc/texi2sgml.in:
	*** empty log message ***

	* etc/texinfo.tex: Recommit without keyword substitution.

Thu Jul 30 20:35:15 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/texi2sgml.in:
	Add a "-file" option to specify the sgml output file.

Wed Jul 29 07:57:15 1998  Claus-Justus Heine  <claus@math1.rwth-aachen.de (Claus-Justus Heine)>

	* etc/install-sh, etc/missing, etc/mkinstalldirs: Initial revision

	* texi/Makefile.am, texi/.cvsignore, sgml/Makefile.am, html/Makefile.am, etc/texi2www.in, etc/texi2sgml.in, etc/Makefile.am, configure.in, Makefile.am, .cvsignore:
	Install either the TeXinfo derived HTML and Postscript versions of the
	manual OR the SGML derived versions.

	* texi/.cvsignore, sgml/.cvsignore, html/.cvsignore, etc/.cvsignore, .cvsignore:
	Initial revision

	* AUTHORS, COPYING, ChangeLog, INSTALL, Makefile.am, NEWS, README,
 	THANKS, acconfig.h, acinclude.m4, configure.in, etc/Makefile.am,
 	etc/latex.in, etc/texi2sgml.in, etc/texi2www.in, etc/texinfo.tex,
 	html/Footer, html/Makefile.am, html/linux-ftape.gif,
 	html/missing-arrow.gif, html/next-arrow.gif, html/prev-arrow.gif,
 	html/up-arrow.gif, sgml/Makefile.am, sgml/next.gif, sgml/prev.gif,
 	sgml/toc.gif, texi/Attic/Bugs.texi.in, texi/Attic/Copying.texi.in,
 	texi/Attic/Documentation.texi.in,
 	texi/Attic/Implementation.texi.in, texi/Attic/Indices.texi.in,
 	texi/Attic/Installation.texi.in, texi/Attic/Introduction.texi.in,
 	texi/Attic/Loading.texi.in, texi/Attic/QuickInstall.texi.in,
 	texi/Attic/Testing.texi.in, texi/Attic/ftape.texi.in,
 	texi/Copying.texi, texi/Makefile.am: Imported Sources

	* AUTHORS, COPYING, ChangeLog, INSTALL, Makefile.am, NEWS, README,
 	THANKS, acconfig.h, acinclude.m4, configure.in, etc/Makefile.am,
 	etc/latex.in, etc/texi2sgml.in, etc/texi2www.in, etc/texinfo.tex,
 	html/Footer, html/Makefile.am, html/linux-ftape.gif,
 	html/missing-arrow.gif, html/next-arrow.gif, html/prev-arrow.gif,
 	html/up-arrow.gif, sgml/Makefile.am, sgml/next.gif, sgml/prev.gif,
 	sgml/toc.gif, texi/Attic/Bugs.texi.in, texi/Attic/Copying.texi.in,
 	texi/Attic/Documentation.texi.in,
 	texi/Attic/Implementation.texi.in, texi/Attic/Indices.texi.in,
 	texi/Attic/Installation.texi.in, texi/Attic/Introduction.texi.in,
 	texi/Attic/Loading.texi.in, texi/Attic/QuickInstall.texi.in,
 	texi/Attic/Testing.texi.in, texi/Attic/ftape.texi.in,
 	texi/Copying.texi, texi/Makefile.am: Initial revision

